Figure 11
3. Select desired temperature and water level.
Figure 12
4. Add detergent and bleach, if desired, to water. Use ONLY liq-
uid bleach.
5. Set wash timer for 30 seconds to begin filling tub and allow
detergent/bleach to mix.
6. Place washables in compartment. Distribute evenly around
agitator. Refer to Figure 13 .
Figure 13
NOTE: Place stringy items such as mop heads in a
laundry net to prevent blockage of drains.
7. Set wash timer to desired time.
1. Drain
Figure 14
Operation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
23 F8221501ENR4
To Next Page
Loading...
Need help?
General