Introduction
Model Identification
Information in this manual is applicable to this model:
UM202*
* This manual applies to models with U3 in the 9th and 10th po-
sitions in the model number [e.g. UM202M1O U30001].
Serial Plate Location
The serial plate decal is located at the rear of the machine. Al-
ways provide the machine’s serial number and model number
when ordering parts or when seeking technical assistance.
1. Serial Plate
Figure 1
Replacement Parts
If literature or replacement parts are required, contact the source
from which the machine was purchased or contact Alliance Laun-
dry Systems at +1 (920) 748-3950 for the name and address of
the nearest authorized parts distributor.
Customer Service
For technical assistance, contact your local distributor or contact:
Alliance Laundry Systems
Shepard Street
P.O. Box 990
Ripon, WI 54971-0990
U.S.A.
www.alliancelaundry.com
Phone: +1 (920) 748-3121 Ripon, Wisconsin
Model Number Familiarization Guide
Sample Model Number: UM202M1OU30001
UM Model Number Prefix
202 Washer-Extractor
M Type of Electrical Control
Table 1 continues...
Introduction
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
5 F8221501ENR4
To Next Page
Loading...
Need help?
General