ii
WARNINGS, CAUTIONS, AND NOTES
IT IS YOUR RESPONSIBILITY to be completely familiar with the warnings and
cautions described in this handbook. It is, however, important to understand that
these warnings and cautions are not exhaustive. Allison Transmission could not
possibly know, evaluate, and advise the service trade of all conceivable ways in
which service might be done or of the possible hazardous consequences of each
way. Consequently, Allison Transmission has not undertaken any such broad
evaluation. Accordingly, ANYONE WHO USES A SERVICE PROCEDURE OR
TOOL WHICH IS NOT RECOMMENDED BY ALLISON TRANSMISSION
MUST first be thoroughly satisfied that neither personal safety nor equipment safety
will be jeopardized by the service methods selected.
Proper service and repair is important to the safe, reliable operation of the
equipment. The service procedures recommended by Allison Transmission and
described in this handbook are effective methods for performing service operations.
Some of these service operations require the use of tools specially designed for the
purpose. The special tools should be used when and as recommended.
Three types of headings are used in this manual to attract your attention. These
warnings and cautions advise of specific methods or actions that can result in personal
injury, damage to the equipment, or cause the equipment to become unsafe.
WARNING:
A warning is used when an operating procedure, practice,
etc., if not correctly followed, could result in personal injury or loss of life.
CAUTION:
A caution is used when an operating procedure,
practice, etc., if not strictly observed, could result in damage to or
destruction of equipment.
NOTE:
A note is used when an operating procedure, practice, etc., is
essential to highlight.
To Next Page
Loading...
Need help?
General
