24
3–10. CHECKING BREATHER
Ensure the breather is clean and free of obstructions. Also, the breather cap must be
loose and free to rattle. Figure 3–5 shows the two breather configurations.
• The earlier breathers should be equipped with a neoprene shroud
(P/N 6883025). Later models have a breather with an integral shroud. If the
breather shroud is damaged, install a new shroud.
Figure 3–5. Breather Configurations
V02884
LATER MODELSEARLIER MODELS
NEOPRENE SHROUD
To Next Page
Loading...
