Phone Guide – 9224
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 16, 2013
Page 11
Attended (Announced) Transfer: Talk to the recipient.
2. Hang up, press the TRANSFER button, or press the XFER softkey to
complete the transfer. 0.
Note: The phone configuration may not enable users to stay on the line to
announce the transfer. Use the procedure in Section 4.4.1, Allworx
Server Software 7.3 or Lower for Announced transfers.
To do a two-step transfer:
If a key is unable for the intended recipient, press the TRANSFER button and
dial the number:
1. Press the TRANSFER button.
To transfer a call to an external party while in Key System mode, press a
free Line Appearance PFK and then dial the phone number
If the system is not in Key System mode, continue to step 2.
2. Wait for the dial tone, and then dial the extension to transfer the call.
Unattended (Blind) Transfer: skip to step 3.
Attended (Announced) Transfer only: Talk to the recipient.
3. Hang up, press the TRANSFER button, or press the XFER softkey to
complete the transfer. 0.
Note: The phone configuration may not enable users to stay on the line to
announce the transfer. Use the procedure in Section 4.4.1, Allworx
Server Software 7.3 or Lower for Announced transfers.
To transfer to voicemail:
Pre-requisite: User is on an active call.
1. Press the TRANSFER button, and then press the VMAIL soft key.
2. Dial the extension, press a BLF key, or press the Speed Dial key.
To Next Page
Loading...
