Phone Guide – 9224
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 16, 2013
Page 12
3. Hang up, press the TRANSFER button, or press the XFER softkey to
complete the transfer. 0.
3.3.5 Release
Use the RELEASE button to end an active call or to abort a new call setup,
such as the middle of a transfer operation.
3.3.6 Park
PBX Behavior on a call appearance: To park an active call, press the PARK
button. The phone briefly displays the parking orbit
1
extension of the call.
Key System Behavior on an outside line: To place an active call in a “system-
wide hold”, press the PARK button. Any phone with a PFK for this outside
line can retrieve the call.
Pressing the PARK button on a handset displays a list of all parked calls, if
there are no active calls on the handset (including the Caller ID and number
of the parked caller, the parked call orbit number, duration of the parked call,
and the extension number that parked the call). Users may also select calls
from the list to retrieve a parked call.
3.3.7 Info
To see a quick description of the phone buttons, use the INFO button. The
button is solid green while in use. For example, use the INFO button to
determine the programmed numbers for each speed-dial button.
To use this feature:
1. Press the INFO button.
2. Press any of the other buttons on the phone. The screen displays a brief
description of the selected button.
†
Digits may vary per system. Please check phone functions tab of the My Allworx Manager
page or consult with the Allworx Server Administrator.
To Next Page
Loading...
