Readjusting the default settings
If the required room temperature is not obtained, readjust-
ment may be necessary.
Cold weather conditions
■
When the room temperature is too low, the “Heating
curve” value is increased in menu 2.1.2 by one increment.
■
When the room temperature is too high, the “Heating
curve” value is decreased in menu 2.1.2 by one incre-
ment.
Warm weather conditions
■
If the room temperature is low, increase the “Heating
curve offset” setting by one step clockwise.
■
If the room temperature is high, reduce the “Heating
curve offset” setting by one step anti-clockwise.
SPLIT10
For Home Owners
Comfort setting heating
To Next Page
Loading...
