NOTE
”Extra hot water” usually means that the electrical
addition has been activated and therefore increases
the electrical consumption.
”Extra hot water” can be activated in three different
ways:
1. Periodic time based extra hot water
■
Interval between increases is selected in menu 1.7.
Menu 1.8 shows when the next increase is due.
■
The increased temperature is maintained by the
electrical addition for one hour.
2. Schedule time based extra hot water
■
The start and stop times for the day of the week that
the increase is required are set in the sub menus for
menu 7.4.0.
■
The increased temperature is maintained by the
electrical addition for the selected period.
3. Temporary extra hot water
■
The current ”extra hot water” mode is shown on the
display (A) when the button is pressed and by
pressing the button again the mode changes
between 3 hours and standby mode.
■
The increased temperature is maintained by the
electrical addition until the period of time has ex-
pired.
13SPLIT
For Home Owners
Comfort setting hot water
To Next Page
Loading...
