Alpha-InnoTec L8 SPLIT - Page 49

2.0 [N] Supply temp.
2.1.1 [N] Offset heating/Total2.1.0 [N] Heating settings
2.1.2 [N] Heating curve
2.1.3.1 [U] Supply temp.at +202.1.3.0 [U] Own heating curve
2.1.3.2 [U] Supply temp.at -20
2.1.3.3 [U] Buckling temperature
2.1.3.4 [U] Supply t. at buckl.
2.1.3.5 [U] Return
2.1.4 [U] Min supply heating
2.1.5 [U] Circ-pump speed heat
2.1.6 [N] Return
2.2.1 [N] Offset cooling/Total2.2.0 [N] Cooling settings
2.2.2 [N] Cooling curve
2.2.3.1 [U] Supply temp.at +202.2.3.0 [U] Own cooling curve
2.2.3.2 [U] Supply temp.at +40
2.2.3.3 [U] Return
2.2.4 [U] Min supply cooling
2.2.5 [U] Circ-pump speed cool
2.2.6 [N] Return
2.3 [U] Max supply temp.
2.4 [U] External adjustment
2.5 [U] Supply/Return temp.
2.6 [U] Degree minutes
2.7 [N] Return
45SPLIT
Miscellaneous
Control