EasyManuals Logo

Alpha-InnoTec LWDV Series User Manual

Alpha-InnoTec LWDV Series
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7Subject to technical amendments without prior notice | 83055800gUK – Translation of the original operating manual | ait-deutschland GmbH
4 Operation and care
NOTE
The device is operated via the control panel
of the heating and heat pump controller
( Operation manual for the heating and
heat pump controller).
4.1 Energy and environmentally
aware operation
The generally applicable requirements for energy and
environmentally aware operation of a heating system
also apply to the use of a heat pump. The most impor-
tant measures include:
Nounnecessarilyhighowtemperature
No unnecessarily high domestic hot water tem-
perature(observelocalregulations)
Do not open windows with a gap/in a tilted po-
sition (continuous ventilation), but instead open
themwideforashorttime(shockventilation).
Always ensure that the controller setting is correct
4.2 Care
Wipeo󰀨theoutsideofthedeviceonlyusingadampcloth
or cloth with mild cleaning agent (washing-up liquid,
neutral cleaning agent). Do not use any aggressive,
abrasive, acid or chlorine-based cleaning agents.
5 Delivery, storage, transport
and installation
IMPORTANT
Damage to the housing and the device components
due to heavy objects.
Do not place any objects that are heavier than 30 kg
on the device.
5.1 Scope of delivery
Check the delivery immediately on receipt for visi-
ble signs of damage and for completeness.
Notify the supplier of any complaints immediately.
The separate package included contains
Documents(operationmanuals,ERPdataandla-
bels)
Type stickers
1 condensate drain pipe nozzle
3 fastening screws
1sealingplateforoorduct
1 long torx bit for panel screws
Load compressor plug for connection to hydrau-
lic unit
Bus line plug (communication) for connection to
hydraulic unit
Control voltage plug for connection to hydraulic
unit
Logo sticker for hydraulic unit
NOTE
The outdoor sensor is included in the scope
of delivery for the hydraulic unit
5.2 Storage
If possible, do not unpack the device until immedi-
ately before installation.
Store the device protected against:
Moisture
Frost
Dust and dirt

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alpha-InnoTec LWDV Series and is the answer not in the manual?

Alpha-InnoTec LWDV Series Specifications

General IconGeneral
BrandAlpha-InnoTec
ModelLWDV Series
CategoryHeat Pump
LanguageEnglish

Related product manuals