2.36
ENG_UD68724_3
Limiteur de vitesse (XEF - Alpine)
SPEED LIMITER (3/3)
Recalling the limit speed
If a speed has been saved, it can be
recalled by pressing switch 3 (RES).
Putting the function on
standby
The speed limiter function is suspended
when you press switch 4 (0). In this
case, the limited speed remains stored
and the stored speed appears on the
instrument panel.
Switching off the function
The speed limiter function is deac-
tivated if you press switch 1: in this
case a speed is no longer stored. The
orange instrument panel warning light
goes out, confirming that the func-
tion is stopped.
3
4
When the speed limiter is set to
standby, pressing on the a (+) side
of the 2 switch reactivates the func-
tion without taking into account the
stored speed: it is the speed at
which the vehicle is moving that is
taken into account.
a
1
2
To Next Page
Loading...