front engine cover ......................................
(up to the end of the DU)
4.9
ENG_UD54114_2
Capot avant (XEF - Alpine)
Bonnet
To open, pull the 1 handle, located on
the left-hand side of the dashboard.
Unlocking the bonnet catch
Push the tab 3 towards the left as you
open the bonnet.
BONNET
1
Opening the bonnet
Lift the bonnet, guiding it up. It is held in
position by struts.
Closing the bonnet
To close the bonnet again, hold the
bonnet in the middle and guide it until it
is in the closed position (movement B).
Apply pressure to the bonnet at 2 until
it locks.
3
Do not press down on the
bonnet: there is a risk that
the bonnet may accidentally
close.
Ensure that the bonnet is
properly locked.
Check that nothing is pre-
venting the catch from lock-
ing (gravel, cloth, etc.).
A
2
B
Vehicles not fitted with
storage compartment A
Due to the presence of me-
chanical components:
– it is forbidden to store objects
under the bonnet;
– when working on the engine
compartment, ensure that you do
not leave anything (cloths, tools,
etc.) Otherwise, this may lead
to the mechanical components
being damaged or cause a fire.
Risk of damage or fire;
– When working in the engine com-
partment, the mechanical com-
ponents may be hot. In addition,
the engine cooling fan may start
at any moment.
Risk of injury.
Before carrying out any
work under the bonnet, the
ignition must be switched
off (please see “Starting,
stopping the engine” in Section 2).
To Next Page
Loading...