Alpine A110 2021 - Towing: Breakdown Recovery (1;2)

towing hitch................................................
(up to the end of the DU)
towing
breakdown ...........................................
(up to the end of the DU)
5.31
ENG_UD67694_4
Remorquage : dépannage (XEF - Alpine)
Towing: breakdown
TOWING: breakdown recovery (1/2)
Before towing, put the gearbox in posi-
tion N, unlock the steering column and
release the parking brake.
If the gearbox cannot be set to posi-
tion N, please contact an authorised
dealer.
Steering column unlocking
With the hands-free card in the pas-
senger compartment, press the engine
start button (without pressing the
brake pedal in order not to start the
engine) or, depending on the vehicle,
insert the remote control card in the
reader (refer to “Starting, stopping the
engine” in section 2).
The column is unlocked, the acces-
sory functions are supplied: the vehi-
cle lights can be used (indicators, brake
lights etc.). At night the vehicle must
have its lights on.
Once you have finished towing, lock the
vehicle using the card (refer to “Card:
general information, use” in section 1):
risk of discharging the battery.
Leave the hands-free card
in the vehicle or, depend-
ing on the vehicle, do not
remove the remote control
card from the reader while the vehi-
cle is being towed.
Risk of the steering column lock-
ing.
With the engine switched off, the gear-
box is no longer lubricated. Transport
the vehicle on a flatbed lorry.
In exceptional circumstances, you
may tow it with all four wheels on the
ground, only in a forward gear, with the
gearbox in neutral position N, over a
maximum distance of 50 miles (80 km)
and not exceeding a speed of 16 mph
(25 km/h).
The speed specified by current legis-
lation for towing must always be ob-
served.