Alpine A110 2021 - Electronic Parking Brake (1;4)

driving ........................................................
(up to the end of the DU)
handbrake..................................................
(current page)
electronic parking brake ............................
(up to the end of the DU)
2.17
ENG_UD68723_4
Frein de parking assisté (XEF - Alpine)
Electronic parking brake
ELECTRONIC PARKING BRAKE (1/4)
To confirm that the electronic parking
brake is applied, the message “Parking
brake on” and the warning light }
on the instrument panel and warning
light 3 on the switch 2 light up.
After the engine is switched off, warn-
ing light 3 goes out several minutes
after the electronic parking brake has
been applied and warning light
}
goes out when the vehicle is locked.
Note: to indicate that the electronic
parking brake is released, a beep
sounds and the message “ Apply park-
ing brake “ appears on the instrument
panel:
– with the engine running: when the
driver’s door is opened;
– with the engine switched off (if
the engine stalls): when a door is
opened.
In this case, pull and release switch 2 to
apply the assisted parking brake.
Assisted release of the parking
brake
The brake will be released as soon as
the vehicle starts and accelerates.
Assisted operation
Applying the electronic parking
brake
When the vehicle is stopped, the
electronic parking brake ensures ve-
hicle immobilisation once the engine
Start/Stop button is pressed 1.
In all other cases, for example, stall-
ing of the engine or the engine going
into standby as a result of the Stop
and Start function (refer to "Starting,
stopping the engine" and "Stop and
Start function" in Section 2), the elec-
tronic parking brake is not applied au-
tomatically.
Manual mode must be used.
For certain country-specific model ver-
sions, the assisted brake application
function is not activated. Refer to the
information on “Manual operation”.
1
3
2