tool kit ........................................................
(up to the end of the DU)
jack ............................................................
(up to the end of the DU)
wheelbrace ................................................
(up to the end of the DU)
towing hitch................................................
(up to the end of the DU)
wheelbrace ................................................
(up to the end of the DU)
puncture.....................................................
(up to the end of the DU)
5.7
ENG_UD56135_3
Outils (XEF - Alpine)
4
1
2
Do not leave the tools unse-
cured inside the vehicle as
they may come loose under
braking. After use, check
that all the tools are correctly fitted
into the case, then place the case
correctly in its storage compartment:
to avoid any risk of injury.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.
Tools
TOOLS
The presence of the tools depends on
the vehicle.
The emergency spare wheel storage
case located on the passenger seat
contains a bag with:
Jack 1
Fold it correctly before refitting it in its
casing (ensure that the wheelbrace is
correctly positioned).
Wheelbrace 2
Locks or unlocks the wheel bolts and
tow eye 4.
The inflation kit case located in the
luggage compartment contains:
Tweezers 3
This is used to remove the wheel bolt
covers.
Towing hitch 4
Please refer to the information on
“Towing: breakdowns” in Section 5.
Fuse tongs 5
Pack of fuses
Please see the information on “Fuses”
in Section 5.
3
5
To Next Page
Loading...