2.50
ENG_UD52290_3
Boîte automatique (XEF - Alpine)
With the engine off, ignition on, doors
closed and gearbox in position (P), it is
possible to switch to position (N) by a
short press on the N switch while simul-
taneously depressing the brake pedal
(the N switch integrated indicator light
appears in white and N is displayed on
the instrument panel).
Position N may be engaged before
opening the driver's door, for a maxi-
mum of around 45 seconds after the
engine has stopped. After this time or
after opening the driver's door, it will be
necessary to turn on the ignition again
to disengage position (P).
Note: Once activated after the engine
is switched off, position (N) is re-
tained until the next time the ignition is
switched on.
AUTOMATIC TRANSMISSION (6/7)
Parking the vehicle
When the engine is switched off by
pressing the button, position (P) is au-
tomatically engaged as well as the
electronic parking brake, for those vehi-
cles equipped with it. The indicator light
on the N control appears in red and P is
displayed on the instrument panel.
When the vehicle is stopped with
the engine running, press and hold
switch N until the N switch integrated
indicator light appears in red. The gear-
box switches to parking position (P).
Special case
As position (P) is automatically en-
gaged when the engine is stopped, it is
sometimes necessary to place the vehi-
cle in position (N), for example in some
car washes or when the vehicle is being
transported.
If information disappears
from the instrument panel,
stop and immobilise the ve-
hicle using the electronic
parking brake or in parking position
(P) by pressing and holding the N
button (the N switch integrated in-
dicator light appears in red with the
engine running).
Never leave the vehicle with
the engine running without
having previously engaged
the Park position (P).
Special feature related to
the Stop and Start function:
if you are going to unfasten
the driver’s seatbelt before
the engine goes into standby due to
the Stop and Start function, make
sure the gearbox is in position (P).
The P warning light will light up on
the instrument panel to confirm this.
Risk of loss of immobilisation.