3.7
ENG_UD51896_2
Air conditionné automatique (XEF - Alpine)
AUTOMATIC CLIMATE CONTROL (4/4)
7
6
Air recirculation (isolation of
the passenger compartment)
K
This function is managed automatically
but you can also activate it manually. In
this case, the operation is confirmed by
a warning light on the button 7.
The system determines whether or not
the air recycling function is used, based
on the quality of the outside air.
Stopping the system
Turn the control 6 to “OFF” to stop the
system. To start it, turn the control 6
again, then adjust the fan speed or
press the button 1.
1
Manual use
Press button 7 – the integrated indica-
tor light comes on.
Prolonged use of this position may lead
to odours, caused by non-renewal of
air, and the formation of condensation
on the windows.
We therefore advise you to return to au-
tomatic mode as soon as air recircula-
tion is no longer needed, by pressing
button 7.
To exit this function, press button 7
again.
The demisting/de-icing will still take
priority over the air recirculation.
To Next Page
Loading...