5.12
ENG_UD59876_3
Pneumatiques (XEF - Alpine)
Fitting new tyres
TYRES (3/4)
For your safety, please re-
spect the speed limit.
When they need to be re-
placed, only tyres of the
same make, size, type and profile
should be used on a single axle.
They must have a load capacity
and speed rating at least equal
to those of the original tyres and
correspond to the tyres recom-
mended by an approved Dealer.
Failure to heed these instructions
could endanger your safety and
affect your vehicle’s roadworthi-
ness.
Risk of loss of control of the ve-
hicle.
For your safety reasons.
Only tyres identical to those
fitted originally or recom-
mended by an approved
dealer must be used.
Failure to follow these instructions
could endanger your safety. This
could adversely affect stability, be-
haviour, braking or the clearance
between the bodywork and the
tyres.
Some of these effects could lead
to the loss of control of the vehi-
cle under certain driving condi-
tions.
To Next Page
Loading...