1.54
ENG_UD45027_1
Ordinateur de bord : généralités (XEF - Renault)
ON-BOARD COMPUTER: general information (2/2)
Resetting the journey
parameters (reset button)
With one of the journey parameters se-
lected on the display, press and hold
button 3, 4 or 5 until the display resets.
Interpreting some of the
values displayed after
resetting
The values showing average fuel con-
sumption, range and average speed
will become more stable and reliable
the further you travel after pressing the
reset button.
For the first few miles after pressing
the reset key you will notice that the
range increases as you travel. This
range takes into account the average
fuel consumption since the last time the
reset button was pressed. Therefore,
the average fuel consumption may de-
crease when:
– the vehicle stops accelerating;
– the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed);
– when driving from an urban area
onto the open road.
Automatic resetting of the
journey parameters
Resetting occurs automatically when
the maximum value of any of the pa-
rameters is exceeded.
4
5
3
To Next Page
Loading...