wipers ........................................................
(up to the end of the DU)
windscreen washer ....................................
(up to the end of the DU)
1.75
ENG_UD51800_2
Essuie-vitre / lave-vitre avant (XEF - Alpine)
Windscreen washer/wiper
Vehicles with automatic wiper
function
With the engine running, press the
stalk 1.
A switching off
B automatic wiper function
When this position is selected, the
system detects water on the wind-
screen and triggers the wipers at a
suitable wiping speed. It is possi-
ble to change the triggering thresh-
old and the time sweeps by turning
ring 2:
– E: minimum sensitivity
– F: maximum sensitivity
NB: in foggy weather or during
snowfalls, the wiping is not automati-
cally triggered and remains under
the driver’s control.
C slow continuous wiping
D fast continuous wiping
Special note
When driving, the wiping speed slows
down whenever the vehicle stops. For
example, fast wiping speed will slow to
normal wiping speed.
As soon as the vehicle moves off,
wiping will return to the speed originally
selected. If stalk 1 is operated, it over-
rides and cancels the automatic func-
tion.
With the ignition on, move stalk 1
A switching off
B intermittent wiping
The wipers will pause for several
seconds between sweeps. It is
possible to change the time be-
tween sweeps by turning ring 2.
C slow continuous wiping
D fast continuous wiping
SCREEN WASHER, WIPER (1/2)
A
B
C
D
1
1
When working in the engine
compartment, ensure that
the windscreen wiper stalk
is in position A (off).
Risk of injury.
2
E
F
Positions B, C and D are accessible
with the ignition on.
Position C is accessible with the ig-
nition on. Positions B and D are ac-
cessible only with the engine run-
ning.