2.4
ENG_UD67695_3
Démarrage, arrêt du moteur (XEF - Alpine)
STARTING, STOPPING THE ENGINE (2/4)
For other functions:
– vehicles fitted with a “hands-free”
card, with the card in the passenger
compartment, press button 1 without
pressing the pedals;
– vehicles equipped with a remote
control card, insert the card in the
reader 3.
3
Special features
– If one of the starting conditions is not
applied, the message “Press brake +
START” or “Select P” is displayed on
the instrument panel;
– in some cases, it will be necessary
to move the steering wheel whilst
pressing the start button 1 to help
unlock the steering column; the mes-
sage “Turn steering wheel + START”
will warn you of this;
Accessories function
(switching on the ignition)
Once you have gained access to your
vehicle, you may use some of its func-
tions (radio, navigation, wipers, etc.).
4
1
Before starting, ensure that nothing
will obstruct the air vents 4.
Starting the vehicle using the
remote control card
When you get into the vehicle insert the
card, with the integrated key pointing to-
wards you, fully into the card reader 3.
With the gearbox in position P or
N (refer to “Automatic gearbox” in
Section 2) and the brake pedal de-
pressed, press the 1 button to start the
engine.
To Next Page
Loading...