20-EN
Playing MP3 Files
You can play CD-ROMs, CD-Rs, and CD-RWs containing
MP3 files on this unit.
Use the format compliant with ISO 9660 level 1 or level 2.
For further information about playing or storing MP3 files,
refer to pages 22 before using the unit.
1 Press the c button.
The movable display will open.
Insert a disc containing an MP3 file with the label
side facing up.
2 The disc will be pulled into the unit automatically. The
movable display will close and playback will begin.
When a disc is already inserted, press the SOURCE
button to switch to the CD mode.
The mode will change every time the button is pressed.
3 To pause playback, press the -/J button.
Pressing the -/J button again will resume playback.
4 To eject the disc, press the c button.
NOTES
• The unit can play discs containing both audio data and MP3
data.
• The MP3 indicator is lit during MP3 playback.
• The track display for CD audio data playback is the track
numbers recorded on the disc.
Music Sensor
(
Skip
)
1 Momentarily press the g DN button once during CD
play to return to the beginning of the current file. If you
wish to access the beginning of a file further back,
repeatedly press until you reach the desired file.
Press the f UP button once to advance to the
beginning of the next file. If you wish to access the
beginning of a file further ahead, press repeatedly until
the desired file is reached.
NOTE
The music sensor feature is functional in the play or pause
mode.
Fast Forward and Backward
1 Press and hold the g DN or f UP button to
quickly move backward or forward until you reach the
desired section of the file.
Selecting Folders
1 Press the F button so that the "FUNC" indicator blinks.
2 Press the FOLDER DN or FOLDER UP button to
select the folder.
NOTE
If a CD changer applicable to MP3 is connected:
In CD changer mode, press the “F” button twice to blink the
“FUNC” indicator and go to step 1 within 5 seconds.
File Search
You can locate all the files on a disc and play them.
1 Press the F button so that the "FUNC" indicator blinks.
2 Press the FILE SEARCH button during playback.
The unit switches to File Search Mode.
3 Turn the Rotary encoder to select the desired file.
4 Press the Rotary encoder to execute the setting. The
selected file starts to play.
NOTES
• During search, press the FILE SEARCH button to cancel the
File Search mode.
• If a CD changer applicable to MP3 is connected:
In CD changer mode, press the “F” button twice to blink the
“FUNC” indicator and go to step 1 within 5 seconds.
MP3 Operation
M.I.X.
SOURCE
f UP
g DN
BAND Rotary encoder
SCANF/SETUP
FOLDER DN
FOLDER UP
FILE SEARCH
REPEAT
c
-/J
(∗ Only when the CD changer is connected)
→ TUNER → CD → CD CHANGER∗
To Next Page
Loading...
Need help?
General
