26-EN
Setting the External Input Defeat
Mode
When inputting external devices to this unit, turning
DEFEAT ON will bypass BASS,TREBLE and MX, i.e.,
sound for external devices is output at the default
setting.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select "INT."
3 Press the BAND button to toggle the mode between
INT ON and INT OFF.
When using Initial mode, set this to ON.
When the Initial mode is not selected, set this to OFF.
4 Press the SETUP button to return to normal mode.
SETUP Operation
BAND
g DN
SETUP
f UP
Demonstration
This unit has a Demonstration feature which simulates
the display functions.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select the
DEMO mode.
3 Press the BAND button to turn on or off the DEMO
mode.
Each press toggles between DEMO ON and DEMO
OFF.
If no button is pressed for 30 seconds, the DEMO
mode activates.
NOTES
• The initial setting at the factory is “DEMO ON.”
• To quit DEMO mode, set to “DEMO OFF.”
4 Press the SETUP button again to return to normal
operation.
To Next Page
Loading...
