Alpine CDA-7893R User Manual

23-EN
Adjusting Source Signal Levels
If the difference in volume level between the CD player
and FM radio is too great, adjust the FM signal level as
follows.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the g DN or f UP button to select the FM-
LV (FM LEVEL) mode.
3 Press the BAND button to select the FM signal level HI
(High) or LO (Low) to make the signal levels between
the FM band and CD player closer.
4 Press the SETUP button to return to normal mode.
NOTE
"Setting the Range of MP3 File Selection" and "Playing MP3
Data" in the "SETUP" mode section are described in MP3
Operation on page 21.
Switching the Tuner Mode
The CDA-7894RB/CDA-7893R incorporates the MAX
TUNE Pro for the highest quality tuner audio.
Moreover, you can choose between 3 settings to suit
your own personal sound preferences usage.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the g DN or f UP button to select
NORMAL.
3 Press the BAND button to switch the TUNER mode.
NORMAL : Standard setting
HI-FI : Sound quality priority setting
STABLE : Noiseless priority setting
BAND
f UP
g DN
SETUP
NOTES
• The initial setting at the factory is "NORMAL."
• If you find the sound is very noisy while listening to the
tuner in the HI-FI mode, we recommend you change to the
NORMAL mode.
4 When the setting is completed, press the SETUP
button to return to the normal mode.
Changing Lighting Colour
(
CDA-7893R only
)
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select
“AMBER."
3 Press the BAND button to toggle the mode between
AMBER ON (amber) and AMBER OFF (green).
4 Press the SETUP button to set the selected mode.
Dimmer Control
Set the DIMMER control to AUTO to decrease the
illumination brightness of the unit with the head lights
of the vehicle ON. This mode is useful if you feel the
unit's backlighting is too bright at night.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the f UP or g DN button to select
“DIM”(DIMMER).
3 Press the BAND button to select the Dimmer mode.
Each press toggles between DIM AUTO and DIM
MANUAL.
4 Press the SETUP button to activate the normal mode.
→ NORMAL → HI-FI → STABLE
SETUP Operation

Alpine CDA-7893R Specifications

General

Brand	Alpine
Model	CDA-7893R
Category	Car Receiver
Language	English