Alpine CDA-7893R User Manual

35-EN
CAUTION
CLASS 1
LASER PRODUCT
(Bottom side of player)
GENERAL
Power Requirement 14.4 V DC
(11–16 V allowable)
Maximum Power Output 60 W × 4
Maximum Pre-Output Voltage 5 V/10k ohms
(CDA-7894RB only)
2 V/10k ohms
(CDA-7893R only)
Maximum Subwoofer Output 4 V/10k ohms
Voltage (CDA-7893R only)
Bass ±14 dB at 60 Hz
Treble ±14 dB at 10 kHz
Weight 1.8 kg (3 lbs. 15 oz)
CHASSIS SIZE
Width 178 mm (7")
Height 50 mm (2")
Depth 155 mm (6-1/8")
NOSEPIECE SIZE
Width 170 mm (6–11/16")
Height 46 mm (1-13/16")
Depth 18 mm (11/16")
Due to continuous product improvement, specifications and design
are subject to change without notice.
FM TUNER SECTION
Tuning Range 87.5 – 108.0 MHz
Mono Usable Sensitivity 0.7 µV
Alternate Channel Selectivity 90 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
Capture Ratio 2.0 dB
MW TUNER SECTION
Tuning Range 531 – 1,602 kHz
Sensitivity (IEC Standard) 25.1 µV/28 dB
LW TUNER SECTION
Tuning Range 153 – 281 kHz
Sensitivity (IEC Standard) 31.6 µV/30 dB
CD SECTION
Frequency Response 5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
PICKUP
Wave length 795 nm
Laser power CLASS I
REMOTE CONTROL (CDA-7894RB only)
Battery Type "AAA" sized dry battery
Battery Quantity 2
Dimensions (W × H × D) 42 mm (1-21/32")
× 121 mm (4-25/32")
× 23 mm (29/32")
Weight (without battery) 50 g (1.8 oz)
Specifications

Alpine CDA-7893R Specifications

General

Brand	Alpine
Model	CDA-7893R
Category	Car Receiver
Language	English