Alpine CDA-7990 - Setting Time

11-EN
D 6 T 01 114:
Setting Time
1
Press and hold the CLK (Clock) button for at least
3 seconds while the time is displayed until the
time indication blinks.
2
Rotate the MODE (Audio Control) knob to adjust
the hours while the time indication is blinking.
3
When the hours has been adjusted, press the
MODE (Audio Control) knob.
4
Rotate the MODE (Audio Control) knob to adjust
the minutes while the time indication is blinking.
The time is automatically set 5 seconds after the
minute adjustment. The time can also be manu-
ally set by pressing the MODE (Audio Control)
knob.