Alpine CDA-7990 - Erasing Disc Title (CD;CD Changer Only)

30-EN
Basic Operation
Erasing Disc Title (CD/CD
Changer only)
1
Press the TITLE button to select the disc titling
mode. Then, press and hold for at least 3 sec-
onds.
2
Press and hold the button for at least 2
seconds to activate the title scanning mode. The
title in the display will blink.
3
Press the DN or UP button repeatedly
unitl the disc title you want to erase is displayed.
4
Press and hold the button for at least 2
seconds to erase the disc title displayed.
5
Press and hold the TITLE button for at least 3
seconds to cancel the disc title erasing mode.
• You cannot erase a CD-TEXT.
This information is stored on the
CD.
TITLE
DN
UP
BAND