12-EN
Basic Operation
Adjusting the Bass/Treble
Center Frequencies
You can change the Bass/Treble center frequencies on this unit.
This gives you flexibility in creating your ideal sound field.
1
Press the hold the SETUP button for at least 3
seconds.
2
Press the
UP
button to select the BASS/TRE
mode. Each press changes the modes as shown :
3
After pressing the TUNE button, press the
UP
or DN button to select the mode to change.
BASS/TRE REM CONT TUNER ILLUMI
SCROLLSUB-WD-OUTAUX-INMUTE
• If you press the DN button
the display scrolls in reverse
sequence.
BASS/TRE REM CONTBC BW TC
SETUP
TUNE
DN
UP
To Next Page
Loading...
