Alpine CDA-7990 - Radio Presets; Manual Storing of Station Presets

34-EN
Radio Operation
Manual Storing of Station
Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold any one of the Preset buttons (1
through 6) for at least 2 seconds until the “ P ”
(Preset) on the display blinks.
3
Press the Preset button into which you wish to
store the station while the “ P ” (Preset) display is
blinking (within 5 seconds).
The display stops blinking once the station has
been memorized. The display shows the band,
preset No. with a “ P ” and station frequency
memorized.
F 1 P 77.8
F 1 P 1 77.8
BAND
SOURCE
A. ME
Preset buttons
1~6