20-EN
Basic Operation
Digital Optical Output On and
Off
When connecting to the Multimedia Manager (PXA-H900), set
the D-OUT mode to ON. Set to OFF when not connecting
PXA-H900.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the
UP
button to select the D-OUT
mode. Each press changes the modes as shown:
3
Press the TUNE button to turn on the D-OUT
mode.
Each press toggles between D-OUT ON and D-
OUT OFF.
4
Press the SETUP button again to return to
normal operation.
• If you press the DN button
the display scrolls in reverse
sequence.
• The initial setting at the factory
is “D-OUT OFF”.
BASS/TRE REM CONT TUNER ILLUMI
SCROLLSUB-WD-OUTAUX-INMUTE
D-OUT ON D-OUT OFF
SETUP
SOURCE
DN
TUNE
UP
D-OU
T
NO
<Display of “D-OUT ON”>
To Next Page
Loading...
