16
Basic Operation
English
1
1
Initial System Start-Up
Immediately after installing or applying power to
the unit, it should be initialized. At the upper-
right corner of the front panel is a small button.
Using a pencil or other pointed object, press
this reset button to complete the initialization
procedure.
Turning Power On and Off
Press the PWR button to turn on the unit.
Note: The unit can be turned on by pressing
any other button except the CDh and
CSTh buttons.
The volume level gradually increases to the
previous level you were listening to before the
unit was turned off.
Press the PWR button again to turn off the unit.
1
1
To Next Page
Loading...
Need help?
General
