18
Basic Operation
English
Subwoofer On and Off
This unit is not equipped with a low pass filter.
Turn on the Subwoofer Output when an
amplifier having the built-in filter is connected to
drive your subwoofer.
Press the SUB W. button to display Subwoofer
ON.
Each press will toggle the subwoofer on and off.
Notes:
• Initial mode is "Subwoofer OFF."
• Leave the "Subwoofer OFF" as long as the
Subwoofer output is not being used.
• When the subwoofer is turned on, the
subwoofer output level can be adjusted. For
more details, refer to the Adjusting Volume/
Balance/Fader section on page 26.
Demonstration
This device has a demonstration mode to show
off only the display effects.
Press the DEMO (demonstration) button.
The demonstration mode will be activated and
will automatically display the display effects.
To cancel the demonstration mode, press the
DEMO button again.
1
1
Subwoofer ON
Subwoofer OFF
2
1
1.@
To Next Page
Loading...
