36
Clock Operation
English
1
2
3
4
Setting Time
Make sure you are in the Clock mode by
pressing the Clock button (see page 34). Then,
press and hold the CLK ADJ. button for at least
2 seconds. The time indication will begin to
blink.
To set the time to the nearest hour, press the
CT button while the time indication is blinking.
For example, if the time shown in the display is
9:35, the CT function will change it to 10:00. If
the display shows 9:29, the CT function will set
the time to 9:00.
Example: To adjust to 9:35
Press the "H" button to adjust the hours while
the time indication is blinking.
Press the "M" button to adjust the minutes while
the time indication is blinking.
The time automatically sets after 5 seconds of
inactivity.
12:30
9:00
9:35
9:35
12:00
1
3
2
4
To Next Page
Loading...
