46
Radio Operation
English
1
2
Automatic Memory of
Station Presets
Press the BAND button repeatedly until the
desired radio band is displayed.
When the Function mode is ON*, press the
(A. ME) button. The frequency on the display
continues to change while the automatic
memory is in progress.
The tuner will automatically seek and store 6
strong stations in the selected band in order of
signal strength.
When the automatic memory has been
completed, the tuner goes to the station stored
in the preset location No. 1.
* Refer to "Using the Function button" on page
32.
Note: If no stations are stored, the tuner will
return to the original station you were
listening to before the auto memory
procedure began.
FM1
FM2
AM
1
2
To Next Page
Loading...
