76
CD Operation
English
6
Titling Disc (Continued)
Repeat step 4 and 5 to input up to 16 digits.
(8 digits for CD shuttle)
To store the inputted title in memory, press the
TITLE button after confirming the last character.
To cancel the title display mode, press the
TITLE button and switch to the display mode.
Notes:
• When Full Data appears in the display,
memory is full and no more titles will be
accepted. To input a new title, one of the
previously inputted titles must first be
deleted.
• To delete a title name, change all of its
characters to Blanks. Input using the same
procedure as above.
• The built-in CD player can store up to 18 CD
titles in the memory.
• Up to 8 characters are allowed for CD
changer titles. The number of titles allowed
depends on the CD Changer model.
• Removing power from the unit may delete
these titles. Use caution when manipulating
the power cord.
• The operations described in steps 3 – 6
must be made within 10 seconds. The input
mode will be cancelled if no action is taken
for over 10 seconds.
6.7
7
To Next Page
Loading...
Need help?
General
