Alpine CDE-154EBT User Manual

12-EN
Playback
1 Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
• When a disc is already inserted, press VSOURCE to switch to the
DISC mode.
2 While playing back MP3/WMA/AAC, press  or  to select
the desired folder.
3 Press  or  to select the desired track (file).
Pressing and holding  or  will fast backward/fast
forward track continuously.
4 To pause playback, press .
Pressing  again will resume playback.
5 To eject the disc, press .
Notes
• Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
• Three-inch (8 cm) CDs cannot be used.
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
Repeat and Random Play
1 During playback, Press z 4 or x 5 repeatedly until the
setting appears.
REPEAT ONE:
Track/file is played back repeatedly.
REPEAT FOLDER
*
:
Files in a folder are played back repeatedly.
MIX FOLDER
*
:
Files in a folder are played back randomly.
MIX ALL:
All files in the disc or USB Memory are played back randomly.
* When MP3/WMA/AAC files are played back.
2 To cancel repeat or M.I.X. play, select (OFF) with the above
procedure.
Notes
• a indicator lights up during repeat play mode.
• s indicator lights up during random play mode.
Searching for CD Text
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.
1 Press ENTER during play.
2 Turn the Rotary encoder to select the desired track, and
then press ENTER.
This will play the selected track.
Notes
• Press any of the preset buttons (1 through 6) during a search to skip
over a calculated percentage of tracks. For details, refer to “Direct
Search Function” on page 32.
•Press t in the search mode to cancel. Or, the search mode is cancelled
if no operation is performed for 60 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be cancelled.
Folder/File Name Search
(concerning MP3/WMA/AAC)
Folder and file names may be searched and displayed during playback.
1 During MP3/WMA/AAC playback, press ENTER to
activate the search mode.
2 Turn the Rotary encoder to select Folder Name Search
mode, and then press ENTER.
3 Turn the Rotary encoder to select the desired folder.
4 Press and hold ENTER for at least 2 seconds to play
back the first file in the selected folder.
CD/MP3/WMA/AAC
/SOURCE
/ II



4
/ENTER


5
Rotary encoder
Preset buttons
(1 through 6)
Folder Name Search mode
00ALPINE.book Page 12 Friday, November 1, 2013 11:30 AM

Alpine CDE-154EBT Specifications

General

Brand	Alpine
Model	CDE-154EBT
Category	Car Receiver
Language	English