Alpine CDE-154EBT User Manual

42-EN
Connect USB cable to an iPod/iPhone with Interface cable for iPod.
Remove the iPod/iPhone
Remove the iPod/iPhone from Interface cable for iPod.
Notes
• After changing the unit to a source other than the USB iPod, remove the
iPod/iPhone. If the iPod/iPhone is removed in the USB iPod mode, data
may cause damage.
• If sound is not output or the iPod/iPhone is not recognized even when
the iPod/iPhone is connected, remove the iPod/iPhone once, then
connect it again, or reset the iPod.
• Do not leave the iPod/iPhone in a vehicle for a long time. Heat and
humidity may damage the iPod/iPhone and you may not be able to play
it again.
Connect USB Memory
Connect the USB cable to the USB connector of the unit.
Remove USB Memory
Pull out USB Memory squarely from the USB cable.
Notes
• When removing USB Memory, pull it out straight.
• If sound is not output or USB Memory is not recognized even when
USB Memory is connected, remove USB Memory once, then connect it
again.
• Change to a source other than the USB Memory mode, then remove the
USB Memory. If the USB Memory is removed in the USB Memory
mode, data may be damaged.
• Route the USB cable away from another cables.
Mounting the Microphone
For the sake of safety, mount the microphone in the following location.
• In a stable and secure location.
• In a location that does not inhibit safely driving the vehicle.
• Mount the microphone in a location where the driver’s voice can
easily be picked up.
Choose a location for the microphone that can easily pick up the drivers
voice. Requiring the driver to move towards the microphone for
audibility causes a distraction that could be dangerous.
iPod/iPhone Connection (sold separately)
USB Memory Connection
(sold separately)
Interface cable for iPod (included with iPod/iPhone)
USB cable (Supplied)
This unit
USB Memory
(sold separately)
USB Cable (Supplied)
USB Connector
This unit
USB Memory
(sold separately)
USB Connector
USB Cable (Supplied)
00ALPINE.book Page 42 Friday, November 1, 2013 11:30 AM

Alpine CDE-154EBT Specifications

General

Brand	Alpine
Model	CDE-154EBT
Category	Car Receiver
Language	English