Alpine CDE-154EBT User Manual

37-EN
•Mechanism error.
1 Press the  button and eject the CD.
If not ejecting, consult your Alpine dealer.
2 When the error indication remains after ejecting, press the 
button again.
If the error indication still does not turn off after pressing the 
button for a few times, consult your Alpine dealer.
• When “ERROR” is displayed:
If the disc cannot be ejected by pressing , press the RESET switch
(refer to “Initial System Start-Up” on page 10) and press  again.
If the disc still cannot be ejected, consult your Alpine dealer.
• A copy-protected WMA file was played back.
– You can only play back non-copy-protected files.
• A sampling rate/bit rate not supported by the unit is used.
– Use a sampling rate/bit rate that is supported by the unit.
• Communication error or others.
– You can solve the problem by switching the source, turning ACC
off/on, or turning power off/on.
• Communication error.
– You can solve the problem by switching the source, turning ACC
off/on, or turning power off/on.
• Abnormal current is run to the USB Memory device.
– You can solve the problem by turning ACC off/on, or turning
power off/on.
• A USB Memory is not connected.
– Make sure the USB Memory device is correctly connected.
• No song (file) is stored in the USB Memory.
– Connect the USB Memory device after storing songs (files).
• A sampling rate/bit rate not supported by the unit is used.
– Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
– You can only play back non-copy-protected files.
• Text information that is not recognisable by the unit is being used.
– Change the text information to text that is supported by the unit.
• An unsupported USB device is connected.
– Change other USB Memory.
• There are no songs in the iPod/iPhone.
– Download songs to the iPod/iPhone.
• Communication error or boot error, etc.
– You can solve the problem by switching the source, turning power
off/on, or turning ACC off/on.
• The iPod/iPhone version is too low.
– Update the iPod/iPhone version.
• The iPod/iPhone is not verified.
– You can solve the problem by resetting the iPod/iPhone.
• Abnormal current is run to the iPod/iPhone.
– You can solve the problem by reconnecting the iPod/iPhone,
turning ACC off/on, or turning power off/on.
• The iPod/iPhone is not connected.
– Make sure the iPod/iPhone is correctly connected and the cable is
not bent excessively.
• The search mode is activated during song downloading.
– No necessary operation.
Indication for USB Memory
NO USB DEVICE
NO FILE
Indication for iPod Mode
NO SUPPORT
DEVICE ERROR
NO USB DEVICE
UPDATING
00ALPINE.book Page 37 Friday, November 1, 2013 11:30 AM

Alpine CDE-154EBT Specifications

General

Brand	Alpine
Model	CDE-154EBT
Category	Car Receiver
Language	English