29-EN
Note
• The Owner’s Manual only describes the setup menu display when
ENGLISH is set.
Setting the Menu Language
Set the language to be displayed on the unit. Six types of font can be
selected.
Setting item: MENU LANG
Setting contents:
ENGLISH (Initial setting) / RUSSIAN / GERMAN / FRENCH /
SPANISH / ITALIAN / DUTCH
Note
• The Owner’s Manual only describes the setup menu display when
ENGLISH is set.
Setting the AUX SETUP mode
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
Setting item: AUX SETUP
Setting contents:
OFF / ON (Initial setting)
OFF:
When set to OFF, AUX source cannot be selected.
ON:
Set to ON when a portable device is connected. If VSOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
Setting the AUX NAME mode
You can change the AUX NAME display in the SETUP mode.
Setting item: AUX NAME
Setting contents:
AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME
Playing MP3/WMA/AAC Data (PLAY MODE)
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can choose to play back the CD data session only. When a disc
contains both CD and MP3/WMA/AAC data, playback starts from the
CD data portion of the disc.
Setting item: PLAY MODE
Setting contents:
CD-DA / CDDA/MP3 (Initial setting)
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA/MP3:
CD data, MP3/WMA/AAC files in mixed mode, and multi-session
discs can be played back.
Note
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it.
Setting the stay on mode
You can set the delay in turning OFF the unit’s power after the vehicle’s
ignition is turned off (ACC OFF). When you select a mode other than
OFF, the music will be paused after you turn the ignition key off (ACC
OFF). At the same time, the prompt “PRESS PRESET 6 TO STAY ON”
will scroll once. Press 6 within 15 seconds to continue enjoying music
for the selected period. If 6 is not pressed, the unit will power off within
15 seconds. During this period, you can only receive a call by operating a
paired Smartphone.
Setting item: STAY ON
Setting contents:
OFF (Initial setting) / 5 MIN / 15 MIN / 30 MIN
Notes
• Note that there is a possibility that the battery may be drained if already
weak, during this period.
• The setting result of STAY ON will be cleared if you switch the 2WAY/
3WAY system mode.
Demonstration
This unit will enter a demonstration mode to display its various
functions.
Setting item: DEMO MODE
Setting contents:
ON (Initial setting) / OFF / QUITE OFF
ON:
The unit starts the demonstration if there is no operation for 30
seconds.
OFF (Standby):
The demonstration mode is in the standby state. Note that if this
unit is disconnected from the vehicle’s battery, the next time you
use this unit the demonstration mode will be ON.
QUITE OFF (Completely closed):
Close the demonstration mode completely.
Setting Adaptive Steering Remote Control
This unit is compatible with the adaptive steering remote control.
This function allows operation by sending the steering remote control
signal to the unit.
To use the steering remote control, perform the following button
operations after setting to ON and pressing ENTER.
For details, consult your nearest Alpine dealer.
Setting item: STEERING
Setting contents:
OFF (Initial setting) / ON
1
Select the assigned function by turning the Rotary
encoder.
(e.g. Select SOURCE)
POWER SOURCE BAND VOL UP VOL DOWN PAUSE
MUTE BWD FWD P UP P DOWN OFF HOOK
ON HOOK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
