EasyManua.ls Logo

Alpine CDE-W296BT - Specifications

Alpine CDE-W296BT
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46-EN
Specifications
FM TUNER SECTION
MW TUNER SECTION
LW TUNER SECTION
CD PLAYER SECTION
USB SECTION
PICKUP
Bluetooth SECTION
GENERAL
CHASSIS SIZE (CDE-W296BT)
CHASSIS SIZE (CDE-195BT)
NOSEPIECE SIZE (CDE-W296BT)
NOSEPIECE SIZE (CDE-195BT)
Note
Due to continuous product improvement, specifications and design are
subject to change without notice.
CAUTION
Tuning Range 87.5 ~ 108.0 MHz
Mono Usable Sensitivity 0.7 μV
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
Capture Ratio 2.0 dB
Tuning Range 531 ~ 1,602 kHz
Sensitivity (IEC Standard) 25.1 μV/28 dB
Tuning Range 153 ~ 281 kHz
Sensitivity (IEC Standard) 31.6 μV/30 dB
Frequency Response 5 ~ 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
USB requirements USB 1.1/2.0
Max. Power Consumption Smartphone charge-capable
USB Class Mass Storage
File System FAT 12/16/32
MP3 Decoding MPEG AUDIO Layer-3
WMA Decoding Windows Media
Audio
AAC Decoding AAC-LC format “.m4a” file
Wave length 795 nm
Laser power CLASS I
Bluetooth Specification Bluetooth v2.1 + EDR
Output Power +4 dBm Max. (Power class 2)
Profile HFP (Hands-Free Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
Power Requirement 14.4 V DC
(11 ~ 16 V allowable)
Maximum Power Output 50 W × 4
Pre-Output Voltage 2 V/10 k ohms
Bass ±9.1 dB at 100 Hz
Treble ±9.1 dB at 10 kHz
Weight 1.85 kg (4 lbs 1 oz)
(CDE-W296BT)
1.4 kg (3 lbs 1 oz)
(CDE-195BT)
Width 178 mm (7")
Height 100 mm (3–15/16")
Depth 161.7 mm (6–3/8")
Width 178 mm (7")
Height 50 mm (2")
Depth 164.7 mm (6–1/2")
Width 169.8 mm (6–3/4")
Height 95.8 mm (3–3/4")
Depth 26.2 mm (1")
Width 169.8 mm (6–3/4")
Height 45.8 mm (1–13/16")
Depth 24 mm (15/16")
CLASS 1
LASER PRODUCT

Table of Contents

Other manuals for Alpine CDE-W296BT

Related product manuals