Alpine CDE-W296BT - Troubleshooting: iPod and Bluetooth Errors; iPod Mode Error Indications; Bluetooth Device Connection Issues

45-EN
• A sampling rate/bit rate not supported by the unit is used.
– Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
– You can only play back non-copy-protected files.
• Text information that is not recognisable by the unit is being used.
– Change the text information to text that is supported by the unit.
• An unsupported USB device is connected.
– Change other USB memory.
• There are no songs in the iPod/iPhone.
– Download songs to the iPod/iPhone.
• Communication error or boot error, etc.
– You can solve the problem by switching the source, turning power
off/on, or turning ACC off/on.
• The iPod/iPhone version is too low.
– Update the iPod/iPhone version.
• The iPod/iPhone is not verified.
– You can solve the problem by resetting the iPod/iPhone.
• Abnormal current is run to the iPod/iPhone.
– You can solve the problem by reconnecting the iPod/iPhone,
turning ACC off/on, or turning power off/on.
• The iPod/iPhone is not connected.
– Make sure the iPod/iPhone is correctly connected and the cable is
not bent excessively.
• The search mode is activated during song downloading.
– No necessary operation.
• The Bluetooth device is not connected.
– Connect the Bluetooth device.
Indication for iPod Mode
NO SUPPORT
DEVICE ERROR
NO USB DEVICE
Bluetooth mode
UPDATING