12-EN
Setup Operation
1 Touch the (HOME) button.
The HOME screen is displayed.
2 To uc h [Setup].
The Setup main screen is displayed.
3 Touch the required setting icon, then touch the setting
item.
Setting items:
Sound: See “Sound Setup” (page 13).
Volume: See “Volume Setup” (page 18).
System: See “System Setup” (page 19).
Connectivity: See “Connectivity Setup” (page 20).
SiriusXM: See “SiriusXM Setup” (page 21).
Bluetooth: See “Bluetooth Setup” (page 22).
Camera: See “Camera Setup” (page 23).
Information: See “Information” (page 24).
Setup
To display the Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or ON
position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe location.
Engage the parking brake.
2 Release the parking brake. (For safety, release the parking
brake while depressing the foot brake pedal).
3 Engage the parking brake again.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the Setup operation has been released.
Engaging the parking brake can reactivate the Setup Menu, as long as
the car’s ignition has not been turned off. It is not necessary to repeat
the above procedure (1 through 3).
Each time the ignition is turned OFF, perform the above procedure.
To Next Page
Loading...
Need help?
General
