Alpine INA-W900E - Route Editing and Track Log Functions; Managing Active Routes

Go to Main Menu Route
1 The Route menu appears. Tap , [Simulate] to run
the simulation at normal speed and with voice guidance
instructions announced.
2 The simulation can be aborted any time
by tapping
You do not need to pause the active route: when you start
driving again, Alpine Navigation Software restarts the voice
instructions from your position.
The easiest way to delete the upcoming route point
(the next waypoint) is to open the Route Information
screen by
tapping the Turn Preview field ( ) on the Map screen,
and then tapping
Alternatively, you can do it through the Navigation menu:
The selected point moves up in the list (becomes a
waypoint to be reached earlier). Tap this button repeatedly,
and the point becomes the start point of the route (when
routing from a given location) or the first waypoint to reach
(when routing from the GPS position).
The selected point moves down in the list (becomes a
waypoint to be reached later). Tap this button repeatedly,
and the point becomes the final destination of the route.
Tap this button to optimise the route. The start point and
the destination remain at their position, but the waypoints
are reordered to make the shortest possible route.
Tap this button to remove the selected point from the route.
As soon as you leave this screen, the route is recalculated
automatically, and you can start navigating right away.
Go to Main Menu Route Edit Route
Go to Main Menu Route Route Info
Remove Next Waypoint
Editing the route
Watching the simulation of the route
Pausing the active route
Deleting the next waypoint from
the route
· If waypoints exist in the active route, you cannot delete
the route immediately on the Route Information screen.
Tap [Remove Next Waypoint] repeatedly until all
waypoints disappear and the [Delete Route] button
appears. Tap it to cancel the whole route.
The easiest way to delete the active route is to open the
Route Information screen by tapping the Turn Preview field
( ) on the Map screen, and then tapping
[Delete Route]. Alternatively, you can do it through the
Navigation menu:
· You do not need to select a destination and create a route
for this; you can also record your driving path while cruising.
Go to Main Menu Route Delete Route
Deleting the active route
Using Track Logs
28-EN
The list of route points appear with the start point at the top
of the list and the final destination at the bottom. If several
waypoints exist, you might need to scroll between pages.
Tap one of the route points in the list. You have
the following options:
Alpine Navigation Software can record the track (how your
GPS position changed) that you drive.
Recording the travelled path (creating a Track Log)
Start driving.
Go to Main Menu Edit Track Logs
1 Start the recording: tap the [Record] button.
You return to the map and you can continue driving.
2 Repeat the above steps, then tap [Stop Recording]
later to stop the recording. Alpine Navigation
Software labels the Track Log with a time stamp.