Display Adjustment
You can fine-tune the position of the screen content on
the display. Tap this button, use the arrows to reposition
the application window, and then tap to save the
changes and exit.
Go to Main Menu Settings
Display Adjustment
Adjust Display
You can control how Alpine Navigation Software behaves
during navigation.
Tap the following buttons:
Automatic Overview
This feature allows driver to set the turn distance overview
and default zoom level
Keep Position on Road
This feature allows drivers to always correct GPS position
errors by matching the vehicle position to the road network.
By turning off this feature you also turn off the GPS position
error filtering. The position shown on the map will be subject
to all position errors and position fluctuations.
Off-route Recalculation
This switch tells Alpine Navigation Software whether to
automatically recalculate the route when you deviate from it.
If this feature is turned off, you need to initiate route
recalculation manually otherwise navigation will be stopped
until you return to the originally recommended route.
Setting another point than the current GPS position as the
start point of the active route will automatically disable this
feature.
Restore Lock-to-Position
If you have moved or rotated the map during navigation,
this feature moves the map back to your current GPS position
and re-enables automatic map rotation after the given period
of inactivity.
Go to Main Menu Settings Navigation
Navigation settings
You can enable some useful warnings and disable the touch
screen in a moving vehicle with Safety
Mode. Tap the following buttons:
Warn When Speeding
Maps may contain information about the speed limits of
the road segments. Alpine Navigation Software is able to
warn you if you exceed the current limit. This information
may not be available for your region (ask your local dealer)
or may not be fully correct for all roads in the map.
This setting lets you decide whether you wish to receive
the warnings. You can set the relative speeding level at
which the application warns you
(100% represents the current speed limit):
· In Built-up Areas: in cities and towns
· Elsewhere: at all other locations There are two types of
warnings. You can turn them on or off independently:
· Audible Warning: A voice message is played using the
selected voice guidance profile.
· Visible Warning: A symbol with the speed limit appears
in the corner of the map (for example: ).
Speed Camera Warning
This feature allows you to receive a warning when
approaching a Road Safety Camera. You must ensure on
your own liability that using this feature is legal in the
country where you intend to use it. You have the following
options:
· Audible Warning: beeps can be played while you are
approaching the camera or just alert sounds if you
exceed the speed limit while approaching one of these
cameras.
· Visible Warning: the type of the camera and the monitored
speed limit appear on the Map screen while you are
approaching one of these cameras.
This button is not displayed when GPS position is not
available or if you are in certain countries where Road
Safety Camera warning is prohibited. Even if the button is
available, you are responsible for checking whether it is
legal to use this feature at your location.
You can open the GPS Data screen.
Tap the following buttons:
Go to Main Menu Settings Warnings
Go to Main Menu Settings GPS
Warning settings
GPS
42-EN
To Next Page
Loading...
