Alpine INE-NAV-30 - Page 204

Owner's manual
Touch operation, Location
of
Controls,
Turning
Power On
or
Off
Getting Started
Touch operation
You
can operate the system by using the touch
panel
on
the
screen.
• Common
onscreen buttons
Returns
to
the previous screen. Depending on the function, this button may
cancel
the operations
performed on the screen.
Closes
the window.
Location
of
Controls
• INE-S920HD/INE-NAV-30
• INE-Z928HD/INE-NAV-38
CD
.!
(Release) button (INE-S920HD/INE-NAV-30
INE-Z928HD/INE-NAV-38:
Only)
Press
and
hold
for
at
least
3
seconds
to turn the power
Use
this button to remove the front
panel.
off.
@
Remote Sensor
(j)
Rotary
encoder/MUTE/<!>
button
(INE-S920HD/
Point
the remote control transmitter towards the
INE-NAV-30 Only)
remote
sensor
within a
range
of
2
meters.
Adjust the volume
by
turning to the left or right.
Press
to activate /deactivate the mute mode.
@
*
(My Favorites) button
Press
and
hold
for
at
least
3
seconds
to turn the power
The
My
Favorites
screen
for
registered
User
1
is
off.
displayed.
®
~
(Eject) button
Press
and
hold this button
at
least
3
seconds
to switch
to
User
2.
INE-S920HD/INE-NAV-30:
@
®(MAP)
button
Ejects
a
disc.
INE-Z928HD/INE-NAV-38:
Recalls
the navigation map
screen.
The
Open/Tilt
screen
is
displayed
.
®
.J
(PHONE) button
®
V
/A
(UP/DOWN)button
(INE-Z928HD/INE-NAV-
Recalls
the Telephone Menu
screen
.
380nly)
When
a hands-free phone
is
connected,
press
and
Press
to adjust the volume.
hold
for
at
least
3
seconds
to switch to the
call
history
screen
.
@)
MUTE button
(INE-Z928HD/INE-NAV-38 Only)
Press
to activate /deactivate the mute mode.
®
J"
(AUDIO)
button
Press
and
hold
MUTE
for
at
least
3
seconds
to activate
Displays
the AudioNisual
screen.
If the AudioNisual
the "Setting the Balance/Fader/Subwoofer"
mode.
screen
is
already displayed,
changes
the
source.
@
RESET
switch
INE-S920HD/INE-NAV-30:
The
system
of this unit
is
reset.
Press
and
hold
AUDIO
for
at
least
3
seconds
to activate
the "Setting the Balance/Fader/Subwoofer" mode.
I
3-EN