Alpine INE-NAV-30 - Page 205

Turning Power On or Off (INE-S920HD/INE-NAV-30 Only)
1 Turn the ignition key to the ACC or ON position.
The system is turned on.
2 Press and hold the Rotary encoder for at least 3 seconds to turn the power off.
Turning Power On or Off (INE-Z928HD/INE-NAV-38 Only)
1 ' Turn the ignition key to the ACC or ON position.
The system is turned on.
2 Press and hold the P (AUDIO) button for at least 3 seconds to turn the power off.
INE-Z928HD/INE-NAV-38 users
Insert the SO memory card into the slot until it is locked.
If the
SO memory card is not inserted properly, the monitor cannot be closed.
4-EN