8
Function Menu
Before connection, the connection icon displays
red
【 】
; and after successful connection, the
connection icon displays green
【 】
. Menu bar: file,
option and encryption function.
1. Click “File”
a. Select “Load Scene File on Computer” to load
the scene file previously saved on the computer
as the current machine working scene.
b. Select “Save as Scene File on Computer”to
save the current machine working scene file
to the computer for later call.
c. Select “Load Whole Machine Scene” to load
the whole machine file previously saved
on the computer to the machine (including
the current working scene, machine preset
scene, output channel configuration data,
etc.), that is, to copy all the machine data
debugged previously to the current connected
machine.
d. Select “Save Whole Machine Scene” to save
all the data of the current connected machine
as the computer file (including the current
working scene, machine preset scene, output
channel configuration data, etc.) for later call
when copying the whole machine.
2. Click “Option”:
a. Select “Frequency Combination Setting” to enter
the frequency combination setting interface. The
aim of audio mixing and frequency mixing can
be achieved by adjusting the volume of each
sound source in the channel.
b. Select “Firmware Update”, select the upgrade
file in the pop-up dialog box, and then click
“Update”button to upgrade the firmware. The
upgrade progress reaches 100%, indicating that
the firmware has upgraded successfully. After the
update, the machine will restart automatically.
c.
Select “Restore Ex-factory Setting” to restore the
data of all settings in the machine to ex-factory state.
d.
Select “Language” to switch between Chinese
and English.
Main Interface
To Next Page
Loading...
