Alpine PXE-0850X - Technical Parameters; Specification Parameters; Function Parameters

14
Function Parameter Function Parameter
Dynamic range ≥110dB
Signal to noise ratio (RCA) ≥100dB
Ground noise High level: 70uVrms; RCA: 7.66uVrms
Channel separation degree ≥80dB
Total harmonic distortion ≤0.05%
Input voltage High level: 26Vpp; RCA: 6.5Vpp
Output voltage 6.5Vpp
Rated power 8CH×25W (4Ω, 14.4V, 1kHz, 10%THD)
Maximum power 8CH×50W (4Ω, 14.4V, 1kHz, 10%THD)
Input/output sensitivity (RCA) 1：1.125（without power amplication）
Frequency response 20Hz to 20kHz
System sampling rate 48kHz/24bit
Input impedance High level: 100Ω; RCA: 20kΩ
Output impedance 51Ω
Working voltage 9-16V
Static current ≤2.3mA (o󰀨 state)
Standby power consumption ≤0.1W
REM start input High level (H1-/H1+), ACC for choice
REM start output 12V（0.2A）
Startup time 10s
Environment temperature -20~60℃
Storage temperature -40~85℃
Gross weight 1.7kg
Size of host 210mm×190mm×45mm
Size of wire controller 92.5mm×48.1mm×24mm
Input signal 6 channel high level, 6 channel RCA audio , high-denition Bluetooth, optical ber, coaxial
Output signal 8 channel high level, 12 channel RCA audio
Output channel signal gain Range: mute, -60dB～+6dB
Output signal equalizer
Type: parametric equalization and graphic equalization
Frequency: 20Hz～20kHz, resolution 1Hz
Q value (slope): 0.404～28.852
Gain: -12.0dB～+12.0dB, resolution 0.1dB
Output signal frequency divider
Each output channel is equipped with a multi-stage high-low pass independent lter,
Filtering type: Linkwitz, Butterworth or Bessel
Filtering frequency-dividing point: 20Hz~ 20kHz, resolution 1Hz
Filtering slope: 6dB/Oct~48dB/Oct
Output phase position Positive phase or reverse phase (+/-)
Output delay 0.000~20.000Ms, 0~692cm, 0~273inch
Preset Sound E󰀨ect The machine can save 6 groups of preset sound e󰀨ect data
Specication Parameter