6
ASSEMBLING & USING YOUR PRODUCT
8. You can now adjust the water pump to your ow preference as
shown in Alpine Quick Tip #1. Once set, push all the cords into the
slotted corner and slide the back door into the back opening of the
fountain.
9. Congratulations, your fountain is now complete. Don’t forget to add
water regularly, as water will evaporate over time.
Alpine Quick Tip #5
Because there is air
in the pump and water
lines, it can take up to 5
minutes for the pump to
expel the air completely.
Then the water will ow
properly. Make sure the
water runs clear during
operation.
Alpine Quick Tip #4
The back door is designed with a
slotted corner to hold the electrical
cords in place.
To Next Page
Loading...
