Alpine WCT688 - Replacement Part

• Replacement Pump ……………………..P065
• Fountain Care Formula………………..PPL102
Foam and scale remover for indoor and outdoor fountains.
• Americana® UV Acrylic Sealer ...……RRR106
Provides protective clear coating for all painted surfaces.
• Touch Up Paint Kit....………………....RTD102
Includes primer, thinner, 7 paint colors, applicator and sealer.
3. Remove the pump from its packaging and adjust
the flow control to the lowest setting to avoid
splashing until the fountain is completely
assembled.
4. Connect the vinyl tubing from inside the Fountain
Base. This is the same tubing that leads to the
Fountain Top. Then place the pump inside the
Fountain Base.
5
REPLACEMENT PART ITEM#
8
ALSO AVAILABLE FROM ALPINE
Alpine Quick Tip #1
Switch the adjuster to the
Right to turn down the
water flow. Switch the
adjuster to the Left to
turn up the water flow.
Alpine Quick Tip #1
Switch the adjuster to the
Right to turn down the
water flow. Switch the
adjuster to the Left to
turn up the water flow.